Measure the circumference of your dominant hand just below your knuckles. Compare the measurements to the size chart below to find your glove size. The size measurements are in inches and relate directly to the glove size. Please note we do advise Cotton Under Gloves to be worn under the Rubber Insulated Gloves, so you need to make a small allowance for that when deciding on glove size.Class 0 Insulating Natural Latex Dielectric Safety Gloves.
- Max working voltage- 1000V DC 1500V AC (Class 0)
- Length 360mm
- Thickness 1mm
- Gloves are tested and certified to EN 60903 and IEC 60903 PPE Category III (Directive 89/686/EEC) IEC 61482-1-2 ASTM F2675
- Available in sizes 8 to 12
Natural latex gloves with outer coating in orange, natural beige interior. Gloves have reinforced mechanical protection & arc flash.
Designed to match hand shape and provide better handling of tools and control devices DEXTERI + WELLFIT is soft to the touch and very supple.
Outer coating provides exceptional grip, even in humid or greasy conditions.
Replace cotton gloves regularly for hygienic reasons. See cotton under-gloves by clicking here.
Class 00 to Class 4 available.
6 months compulsory testing. Tests should include air inflation to check for leaks – please see our pneumatic glove tester, a visual inspection while pressurized and a dielectric test in accordance with EN60903 standards of live working gloves of insulating material.
STORAGE
The gloves must be kept in their original wrapping. Do not compress them. Do not fold them. Do not store them near light or heat sources natural or artificial . Storage temperature must be between 10 and 21° C. Humidity 60+/- 10%
TRANSPORT
Transport conditions must be the same as storage conditions
PRECAUTIONS
Gloves should now be allowed unnecessarily to come in contact with turpentine, white spirit, strong acid or any corrosive products. Do not use wet gloves
USE
Inflate the gloves with air in order to detect potential faults. Carry out visual inspection. The standards EN 60903 and IEC 60903 indicate in annex E.3 (informative) that Category C should be used in ambient temperatures between -40° C and +55° C
CLEANING
With water and soft soap only . Dry at less than 65° C.
PACKING :
Each pair of gloves is packaged in an opaque sachet with a direction of use inside. On the packaging, the following information is given : class, size, categories, type of cuff, length of gloves, test date, manufacture and validation batch numbers. The sachet and instruction for use are certified as part of the PPE and must be kept with the gloves.
